{"product_id":"61326","title":"Ross PBA 1-36 Axial Flow Mixer","description":"Ross PBA 1-36 Axial Flow Mixer\u003cbr\u003e- Vapor-tight, suitable for up to +2 psi internal pressure. \u003cbr\u003e- Elastomers suitable for HCL and Ethanol. \u003cbr\u003e- Air\/oil hydraulic lift with anti-rotation hydraulic cylinder, requiring 80-100 psig air supply. Flow control valve, air operated two-hand operator safety pushbuttons and selector switch. \u003cbr\u003e- Stainless steel type 316L wetted parts with Black (PFA) Teflon coating. \u003cbr\u003e- Stainless steel type 316L mixing shaft with Black (PFA) Teflon coating operating between 9 \u0026amp; 90 rpm @ 6 – 60 Hz.\u003cbr\u003e- Mixing Shaft is sealed via a Double Flexi-Lip Dry Running FDA MF Teflon Lip Seal with Viton O-rings. This seal design operates without using lubrication to prevent contamination with the product. Seal is installed in UHMW housing for easy removal\/assembly. \u003cbr\u003e- Mixing Shaft has one (1) – 7.5\" diameter, 4-blade, 45 degree pitched, Axial Flow Paddle Blade. The blade is attached to the bottom of the mixing shaft with an internal thread and sealed via a Viton O-ring between the blade hub and shaft. Blade will tighten as it spins with the shaft. \u003cbr\u003e- Driven by a 1 HP, Explosion Proof (Class 1, Div. 1, Group D; Class 2, Groups F\u0026amp;G), VFD-rated, 10:1 speed range motor suitable for operation on 230\/460 volt, 3 phase, 60 Hz power supply. \u003cbr\u003e- Explosion Proof Safety Limit Switch to prevent operation of agitator while in the raised (non-mixing) position, or without a mix can in place.\u003cbr\u003e- Cover, Vapor-tight and rated for +2 psig internal pressure when combined with matching mix vessel. T-316, 80-grit exterior finish with black PFA (Teflon) coating on underside. \u003cbr\u003e- Two (2) - 4\" 150# RF flanges, two (2) - 1\" FNPT connections, one (1) - 6\" Sight \u0026amp; Charge port with Metaglass sight glass, one (1) - 1\" Tri-Clover port (pressure) and two (2) - 1\" 150# RF flange ports. ID of ports are Teflon coated. Viton Cover O-ring. \u003cbr\u003e- Mix Vessel: 36 gallon working, 44 gallon full holding, rated for +2 psig internal pressure, 22\" ID x 24\" straight side and a dished bottom with a 2\" flush bottom Ball Valve with Tri-Clover outlet (bottom-center) located 14.5\" off the base. \u003cbr\u003e- A heating\/cooling jacket made from T-304 stainless steel, 80-grit finish and rated for 50 psig @ 350F is installed on the sides and bottom. \u003cbr\u003e- Three (3) stainless steel legs with casters. Can lock receiver for aligning and locking mix vessel to mixer. Interior coated with Black (PFA) Teflon. NEMA 7\/9 Low Profile Thermocouple in bottom dish of Mix Vessel. \u003cbr\u003e- All non-stainless steel exterior surfaces are painted Ross Off-White, a two-component epoxy coating.","brand":"Bridge Tronic Global","offers":[{"title":"Default Title","offer_id":44815345516734,"sku":"61326","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/6175\/6862\/files\/IMG_1010-done_af3007f5-263d-4e37-861d-726b99734100.jpg?v=1737541352","url":"https:\/\/www.bridgetronic.com\/products\/61326","provider":"Bridge Tronic Global","version":"1.0","type":"link"}